Magnetic Separation Machine

Magnetic Separation Machine

Magnetic Separation Machine is an important equipment used in iron ore dressing and benefication line. SBM Magnetic Separation Machine is a great machine which can optimize the recovery of minerals, improve the economic efficiency of the processing plant, and increase the concentration ratio. There is no doubt that it is an ideal choice for mining investors.

Service online
  • +86-21-58386189
  • +86-21-58385681

  • Easy to operate

    Magnetic Separation Machine is extremely easy to install and clean.

  • Wide applications and adjustable

    The intensities of magnetic field can be adjusted according to different requirements.

  • Reliable and with long service life

    The machine is with the features of safe, reliable, low failure rate and long service life.

  • Simple structure and good performance

    Magnetic Separation Machine adopts reasonable structure, and it is efficient and works well. It is with high benefication ratio and high recovery rate.

After the pulp enters the tub through the feeding box, mineral grain enter into feeding area of tub at a state of un-consolidation under the action of the water flow of feeding sprinkler pipe. Under the action of the magnetic field, the magnetic mineral grains get together and "magnetic magnetic group" or "magnetic chain" come into being . "magnetic group" or "magnetic chain" move to magnetic poles and be adsorbed in the cylinder under the influence of magnetic in the pulp. The polarity of the cylinder poles arranges alternately along the direction of rotation and it is changeless when working. When "magnetic group" or "magnetic chain" rotate with the cylinder, matrix and other Non-magnetic minerals which were mingled in the "magnetic group" or "magnetic chain" fall out in the flipping because of magnetic phenomenon, was eventually suck in cylinder surface "magnetic group" or "magnetic Ephraim" is concentrate. Concentrate with cylinder turned to the edge of the weak magnetic force in the ore discharge, washing water hoses under the action of unloading was to concentrate slot, if is the magnetic magnetic roller, unloaded ore is to use brush roller. The magnetic or weak magnetic minerals in the pulp was left in the tank with the pulp eduction, namely is tailings.

Model Roller size Magnetic intensity on surface mT Processing ability Drive power Roller rotary speed Weight
(Dia.×Length)
mm Geometric center average highest T/h m3/h Kw Kg
CTS(N,B)-46 400×600   130 160 1~3 5 1.1 45 600
CTS(N,B)-66 600×600   145 170 5~10 16 1.1 40 750
CTS(N,B)-69 600×900   145 170 8~15 24 1.1 40 830
CTS(N,B)-612 600×1200   145 170 10~20 32 2.2 40 990
CTS(N,B)-618 600×1800   145 170 15~30 48 2.2 40 1330
CTS(N,B)-712 750×1200 120 155 180 15~30 48 3 35 1500
CTS(N,B)-718 750×1800 120 155 180 20~45 72 3 35 2100
CTS(N,B)-918 900×1800 148 165 190 25~55 90 4 28 2900
CTS(N,B)-924 900×2400 148 165 190 35~70 110 4 28 3500
CTS(N,B)-1018 1050×1800 148 165 190 40~75 120 5.5 22 4000
CTS(N,B)-1021 1050×2100 148 165 190 45~88 140 5.5 22 4500
CTS(N,B)-1021 1050×2100 160 240 280 45~88 140 5.5 22 4500
CTS(N,B)-1024 1050×2400 148 165 190 52~100 160 5.5 22 5000
CTS(N,B)-1024 1050×2400 160 240 280 52~100 160 5.5 22 5000
CTS(N,B)-1030 1050×3000 160 240 280 65~125 200 7.5 22 6200
CTS(N,B)-1218 1200×1800 148 165 190 47~90 140 5.5 19 5800
CTS(N,B)-1218 1200×1800 160 240 280 47~90 140 5.5 19 5800
CTS(N,B)-1224 1200×2400 148 165 190 82~120 192 7.5 19 6200
CTS(N,B)-1224 1200×2400 160 240 300 82~120 192 7.5 19 6200
CTS(N,B)-1230 1200×3000 148 165 190 80~150 240 7.5 19 7200
CTS(N,B)-1230 1200×3000 160 240 280 80~150 240 7.5 19 7200
CTS(N,B)-1530 1500×3000 180 240 300 90~170 270 11 14 8100
CTS(N,B)-1540 1500×4000 180 240 300 115~220 350 11 14 9300

 Mineral processing process of this product is intended to provide a short, no consumption of water and energy consumption low-induction gold powder processing equipment.

 
This products its features is, contains: machine frame 1, and cloth roll 2, and cloth rectifier slot 3, and motor 4, and Board very and gate Board constitute of electrostatic field generator 5, and by first insulated with conveying machine 601 and second insulated with conveying machine 602 common constitute of insulated with conveying device 6, and cleaning device 7, and row mine export 8, and insulated support flat 9 and power 10, which:
 
Machine frame, by insulated material flat and angle connection into four stared blankly column shaped machine shell 1001, and by angle welding into rectangular framework of base 10,022 Department points connection composition, and in machine shell 1001 of a side insulated material flat Shang installation cloth roll insulated support flat 901 of location, and two conveying machine active roll insulated support flat 902 and 904 of location, hollow out through insulated material support flat and motor axis of space.
 
Fabric roll, made from insulating materials, Shun axial surface shaped like a movable type. Cloth roll 22 end respectively and a as cloth roll drive motor of first motor 401 and bearing seat with axis connection, and fixed in cloth roll insulated support flat 901 of top surface Shang, cloth roll insulated support flat 901 installation in machine shell 1001 within relative two a surface of insulated material flat Zhijian, and end cloth roll insulated support flat 901 from hollow of insulated material flat in the wear out in machine shell 1001 outside, makes motor 401 in machine shell 1001 of outside, cloth roll insulated support flat 901- End and the other end niches and case 1001 1001 connection parts and casing connections.
 
Fabric rectifiers grooves, made of insulating material, and funnel-shaped, installed on the cloth just below the rollers 2, cloth roll insulation support plate on the lower end of the 901.
 
Insulated belt conveyor, the first insulated belt conveyor 601 and 602 second insulation tape conveyor longitudinal disposed machine shell 1001 respectively two surfaces of insulating material between the plates, parallel to each other to form insulating tape conveyer 6 and two insulated belt conveyor with the fabric roll 2 parallel, where:
 
First insulated with conveying machine 1, is located in by said machine shell 1001 within relative two a surface of insulated material flat Zhijian left of location, by first active roll 6011, first active roll insulated support flat 902, gate Board 501, first from moving roll insulated support flat 903, first from moving roll 6013 followed by along upper and lower direction connection and into, by said first active roll 60,112 end respectively and a as first active roll drive motor 402 and bearing seat with axis connection, And fixed in by said first active roll insulated support flat 902 top surface Shang, by said first active roll insulated support flat 902 bottom surface connection gate Board 501 top surface, gate Board 501 bottom surface connection first from moving roll insulated support flat 903 top surface, first from moving roll 60,132 end fixed in first from moving roll insulated support flat 903 bottom surface Shang of bracket Shang, by said bracket also has for connection cleaning device 701 of structure, by said first active roll 6011, and First conveying insulated with 6012 and first from moving roll 6013 followed by along upper and lower direction scroll connection, by said first active roll insulated support flat 902 of end by connection parts fixed in machine shell 1001 of a board surface inside, another end through relative side machine shell 1001 hollow at of Board surface, makes motor 402 in machine shell of outside, and by connection pieces fixed, by said first from moving roll insulated support flat 9,032 end fixed in machine shell 1001 within relative two a surface of insulated material flat Shang, 601 first insulating tape conveyors vertical installation position the shell 1001 left.
 
Second insulated with conveying machine, is located in by said machine shell 1001 within relative two a surface of insulated material flat Zhijian right of location, by second active roll 6021, second active roll insulated support flat 904, Board very 502, second from moving roll insulated support flat 905, second from moving roll 6023 followed by along upper and lower direction connection and into, by said second active roll 60,212 end respectively and a as second active roll drive motor 403 and bearing seat with axis connection, And fixed in by said second active roll insulated support flat 904 top surface Shang, by said second active roll insulated support flat 904 bottom surface connection Board very 502 top surface, Board very 502 bottom surface connection second from moving roll insulated support flat 905 top surface, second from moving roll 60,232 end fixed in second from moving roll insulated support flat 905 bottom surface Shang of bracket Shang, by said bracket also has for connection cleaning device 702 of structure, by said second active roll 6021, and Second conveying insulated with 6022 and second from moving roll 6023 followed by along upper and lower direction scroll connection, by said second active roll insulated support flat 904 of end by connection parts fixed in machine shell 1001 of a board surface inside, another end through relative side machine shell 1001 hollow at of Board surface, makes motor 403 in machine shell of outside, and by connection pieces fixed, by said second from moving roll insulated support flat 9,052 end fixed in machine shell 1001 within relative two a surface of insulated material flat Shang, Second insulation 1001 602 vertical belt conveyor installation in case the right location.
 
The first insulated belt conveyor 6012 and the cloth rectifiers grooves 3 exports of gold powder on a horizontal distance of a.
 
Electrostatic field generator, which, gate Board 501 and Board very 5,022 very between of distance for 150MM--350MM, poles between of voltage for DC 60KV--150KV, gate Board 501 installation in first insulated with conveying machine 601 within, Board very 502 installation in second insulated with conveying machine 602 within, constitute level of electrostatic field, and gate Board 501 and Board very 502 was respective where of insulated with conveying machine of conveying with separated.
 
Gate Board, is quadrilateral framework, plates back aspect number article strengthened reinforced is Matrix type structure, with insulated material made (Figure 7) (Figure 8) (Figure 9) of shape, in by said gate Board 501 of Board surface Shang with metal wire embedded into parallel and the continuous of gate, by said gate Board 501 Board surface and around with insulated material put by said gate covered, by said gate Board 501 of Board surface distance by said first conveying insulated with 6012 within side of level distance to guarantee in by said first insulated with conveying machine 601 work Shi, The gate panels of the Board 501 and a first insulating belt conveyor 6012 dynamic gap left between the sides to avoid collisions.
 
Board very, is quadrilateral framework, plates back aspect number article strengthened reinforced is Matrix type structure, with insulated material made (Figure 4) (Figure 5) (Figure 6) of shape, by said Board very 502 of plates by metal flat made, its around and back was insulated material package up became a overall, by said Board very 502 and by said of second conveying insulated with 6022 within side of distance to guarantee in by said second insulated with conveying machine 602 work Shi, The second side plate, insulated belt conveyor 6022 502 dynamic clearance between the front to avoid collisions.
 
Sweepers, 601 first insulating tape conveyor cleaning device 701, installed in the driven roller are used to fasten the first bracket, second insulation 602 belt conveyor cleaning device 702, installed in the driven rollers are used to fasten the second bracket.
 
1001 power supply mounted in the casing on the outer sides, positive electrode plate was 502, negative grounding grid Board 501 grounding.
 
This overcomes the traditional gold processing equipment need to consume water, energy consumption and high length-and dressing processes.

Get Price And Support


Respond within 24 hours !

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).